Transmission Line Towers


Transmission line towers are being used in the Electrification of projects for transmitting the power from power generating units to Substations.

The design of different types of transmission line towers depends on various factors such as voltage (33 kV to 800 kV), conductor & earth wire, wind zone, line deviation angle (suspension, tension & terminal, tee off the tower)

We manufacture all types of lattice transmission line towers structures as per customer requirements with Hot Dip Galvanizing coating thickness as per customer’s specification & requirement as per the weather conditions of the location of the tower.


Substation & Switch Yard Structures


The substation is a high-voltage electric system facility. The purpose of a substation is to step down high voltage electricity from the transmission system to lower voltage electricity so it can be easily supplied to homes and businesses in the area through lower-voltage distribution lines. It also is used to change AC voltages from one level to another, and/or change alternating current to direct current or direct current to alternating current.
We manufacture substation & switchyard structures which include Gantries & Equipment support structures as per customers’ requirements.
Gantry structures are mainly used to guide the power conductors from the last tower near the substation to the electrical equipment and for line crossing.  This structure consists of a number of columns and beams, which depend on the number of circuits of the line. Equipment Support Structures are columns, supporting electric equipment in a substation. Depending upon the site and client’s requirement, the Gantry and Equipment support structures can be mounted on substation building also.



Substation & Switch Yard Structures


The substation is a high-voltage electric system facility. The purpose of a substation is to step down high voltage electricity from the transmission system to lower voltage electricity so it can be easily supplied to homes and businesses in the area through lower-voltage distribution lines. It also is used to change AC voltages from one level to another, and/or change alternating current to direct current or direct current to alternating current.
We manufacture substation & switchyard structures which include Gantries & Equipment support structures as per customers’ requirements.
Gantry structures are mainly used to guide the power conductors from the last tower near the substation to the electrical equipment and for line crossing.  This structure consists of a number of columns and beams, which depend on the number of circuits of the line. Equipment Support Structures are columns, supporting electric equipment in a substation. Depending upon the site and client’s requirement, the Gantry and Equipment support structures can be mounted on substation building also.




Windmill Lattice Towers



We manufacture steel structures suitable for WTG Lattice Towers with any type of material specification as per required height & high wind speed zones.



Telecomm Towers



We manufacture all types of telecom towers with different heights suitable for Narrow bases, Microwave, Rooftop & Ground Base Towers. We have a proven track record for completing several major projects for reputed corporate companies such as Vodafone, Tata, Indus, Reliance, Airtel, WTTIL and Quippo, etc


Cable Trays

We are the manufacturer and supplier of CABLE TRAYS. We manufacture both Industrially applicable cable trays range of Hot Dip Galvanized Perforated and Ladder type cable trays that are accompanied with cable support systems and accessories.

  • Thickness: 1.6mm, 2mm, 2.5mm & 3mm
  • Width: Ranging from 50 to 1200mm
  • Length: 2400 mm 3000 mm 6000 mm
  • Side Rail Height: 50 mm, 100 mm, 150 mm
  • Tray Type: Perforated Cable Tray, Ladder Type Cable Tray.
  • Materials: Mild Steels, Pre Galvanize sheet, FRP
  • Finishing: Hot Dip Galvanized

Perforated Cable Tray

We are the manufacturer and supplier of CABLE TRAYS. We manufacture both Industrial applicable cable trays range of Hot Dip Galvanized Perforated and Ladder type cable trays that are accompanied with cable support systems and accessories.

We manufacture a wide range of Perforated Cable Trays, which are ideal to install/lay a large volume of power cables. Overheating and consecutive damaging of cable is avoided, coupler holes inside facilities easy connecting of cable trays to each other. Perforated cable trays can be hung using a center rod support, C-hanger, or two-trapeze configuration. They can also be mounted on the wall using brackets.

Range of Width 50mm to 600mm
Range of Span 2.5m to 6m
Sheet Thickness 1.6 mm to 2.5mm & 3 mm
Finish Types Hot Dip Galvanized, Pre Galvanised
Range of Height 40mm, 50mm, 75 mm
RF/IB 12mm, 15mm
Material Mild Steel, Pre Galvanized Iron

Ladder Type Tray

We are the manufacturer and supplier of CABLE TRAYS. We manufacture both Industrial applicable cable trays range of Hot Dip Galvanized Perforated and Ladder type cable trays that are accompanied with cable support systems and accessories.

We are engaged in the manufacturing Ladder Type Cable Trays which are ideal to install/lay a large volume of heavy-duty power cables.
These cables have a uniform distance between them and consist of two longitudinal side rails or rungs, which are welded to the side rails or bolted in some cases.

Range of Width 150mm to 1500mm
Range of Span 2.5m to 6m
Sheet Thickness 1.5mm to 3mm
Rung Spacing 250mm, 300mm
Range of Height 20mm to 150mm
Finish Types Hot Dip Galvanized
Material Mild Steel, Pre Galvanized Iron

Roofing Channel – C & Z Purlins for PEB

We manufacture both type of C & Z purlins which is also known as cold-form or roll formed structural steel section. In today’s modern world C and Z steel purlins are best for fast construction of steel industrial buildings (Pre-Engineered Building)

Pre-Engineered Building

PEBs can be delivered to a site in just 4 to 6 weeks –conventional steel structures take as much as 25 weeks to complete. The unique techniques employed during fabrication help PEBs be up to 30% lighter than regular steel products. No welding or fabrication is required at the construction site, resulting in greater speed and efficiency.

Pre-engineered buildings have gained a global reputation for durability, water, and earthquake resistance. PEBs are tremendously versatile – they are easy to set up, expand, modify, and transport to different locations

MMS – Solar Module Mounting Structure

KPB has set up manufacturing facilities for various types of profiles covering all types of Solar Panel Module Mounting Structure required for SPV Power Plant Projects and manufacturing product profile comprises of Hot Dip Galvanized Solar Structures as well as Galvalume sheet & Pre-galvanized structures such as Rafter, Purloins, Column, Bracing (side, rear, back, etc), C & Lip Channels, HAT sections, MS Angle sections, Joint plates, & Beam, etc., based on customer drawings & specifications.

Our plant is equipped with modern technology and machines, having a unique facility of providing both fabrication and galvanizing services under one roof in one place. The process is carried out under the supervision of qualified engineers to ensure conformance with the applicable standards.

Galvanized (Gl) Earthing Strips and Flats

We at KPB provides a wide range of GI (Galvanized) Earthing Strips/Flats as per customer’s specification & requirements.

Galvanized Earthing Strips/Flats are connected to the actual Earthing bar, and in some places they are used instead of insulation cables due to lower cost and high benefits, and it result in maximum Earthing resistance and meet all the required installation requirement. It is used to provide earthing to various areas like industrial, residential, commercial, etc.


Double Break Isolator / Disconnector


Standards IEC 62271-102: 2018
Design Double Break Centre Post Rotating
Voltage Rating 12 to 420 kV
Current Rating 200 to 3150 Amps
Short-Time Current Rating From 16kA/1s to 50kA/3s
Operating Mechanism Motor Operated, Gear Operated, Handle Operated
Special Purpose Applications Underhung, Tandem, Vertically Mounted, Double break with Double ES

SECTORS SERVED


Solar Power Plant

Solar Power Plant



Wind Mills (WTG)



Power Transmission



Pharma Industries



Oil & Gas Refineries



Railway & Metro Electrifications



Chemical & fertilizers Industries



Pre Engineered Buildings/Constructions